EvoBoost

Accessory for sites using venturi dispensers with low water pressure The EvoBoost, as part of Hydro’s laundry solution, is equipped with a powerful and reliable diaphragm pump. Providing a flow rate of 1.4 GPM (5.2 LPM), it eliminates the complications associated with low water pressure, for up to three low flow EvoClean units, or one high flow EvoClean unit. The EvoBoost is designed specifically to fit, neatly, into typical OPL operations, while still being versatile enough to be paired with any venturi dispenser. **Features & Benefits** #### Eliminates accuracy challenges when site has low water pressure The EvoBoost is equipped with a powerful and reliable electric diaphragm pump in either 230 VAC or 115 VAC versions with a low rate of 1.4 GPM (5.2 LPM). #### Services up to three low flow EvoClean dispensers from a single dispenser The EvoBoost is designed to supply two to three low flow EvoClean units or one high flow unit with 32 psi (2.2 bar) consistently. #### Features air gap backflow presention The air gap on the water inlet of the EvoBoost provides WRAS category 4 chemical backflow prevention and is compliant with ASME A112.1.3. **Common Questions** *How many EvoCleans can a EvoBoost run?* EvoBoost can operate 3 LF EvoCleans or 1 HF *How large is the Evoboost resevoir?* 15L or 4 Gallons *How does the Evoboost fill itself?* There is a float valve that automatically fills the EvoBoost to a preset level *How does the Evoboost pump turn on?* The electric diaphragm pump in the Evoboost is activated by a pressure switch that detects when pressure drops below a set point (e.g. when an EvoClean is operating).